Z Automotive Tazer JL/JT Mini individual display

Z Automotive

Z Automotive Tazer JL/JT Mini

Sale price$427.00
SKU: Tazer JL Mini
Quantity:

Z Automotive Tazer JL/JT Mini

MCQUEEN

190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States

+14806332929
Adjust Settings to what you prefer

Tazer JL Mini is to be an essential tool for owners of the 2018+ Wrangler JL and Jeep JT Gladiator. All engine and transmission variations are supported, including export models.

Simple plug-in installation

Simply unplug the SGW module and plug the Tazer JL Mini in its place. Located above the OBD2 Diagnostic connector. To make it easier for removal and reinstallation for dealer visits, add on our SGW Extension Cable.

Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Tazer JL Mini features can be broken into three categories
  1. Vehicle Settings are accessed with the engine OFF and the ignition in the “RUN” position. These are changes made to the Jeep such as tire size, gear ratios or settings which accommodate other upgrades. These changes will continue to operate after the Tazer JL Mini is unplugged.
  2. Live Functions are accessed with the engine ON. These are operations the Tazer JL Mini performs live, only while it is physically connected. plugged in.
  3. “Non-Menu” Live Functions are not located in a menu. They are activated automatically or with a steering wheel button combination. These are operations the Tazer JL Mini performs live, only while it is physically connected.
List of Vehicle Settings
  • Light Show – 6 preset and 3 make-your-own light shows that flash all the exterior lights – perfect for car shows/first responders/off-road visibility – controlled from key fob or steering wheel buttons – can be enabled in-motion for use in parades, off-road and for legal police/EMS applications (contact support for more info)
    read and clear DTCs system-wide or in specific modules
  • Change tire size
  • Change gear ratio (max 4.50 on 4XE)
  • Change Transfer Case LOW ratio
  • Enable/disable TPMS system
  • Set TPMS pressure warning limit, front and rear, between 25psi and 85psi
  • Enable/disable backup camera
  • Enable/disable Cargo Camera input (8.4 UConnect only)
  • Enable/disable CD (wired audio) input*
  • Enable/disable TravelLink/XM traffic and weather
  • Activate Offroad Pages after upgrading to 8.4” radio
  • Change daytime running lights (DRL) region (CA/USA)
  • Change DRL location
  • Enable/disable DRL Dropout function
  • Enable/disable factory fog lights
  • Enable/disable Fog Light Dropout (when fogs shut off while high beams are on)
  • Enable/disable one-touch lane change
  • Enable/disable factory halo lights (including BCM output for adding halos)
  • Change headlight type (Std/LED)
  • Change fog light type (Std/LED)
  • Change taillight type (Std/LED)/delete sensor circuit for running aftermarket lights
  • Change front turn signal type (std/LED)/delete sensor circuit for aftermarket lights
  • Enable/disable factory auto hi-beam
  • Enable/disable Trailer Tow setting
  • Disable electronic sway bar (if removed from the vehicle)
  • Disable electronic steering pump for hydraulic steering conversions
  • Enable the trailer brake controller (primarily Gladiator)
  • Disable front and rear lockers for axle swaps
  • Disable front axle disconnect module for axle swaps
  • Declare the presence of a Drive Train Control Module (Rubicon Transfer Case)
  • Enable/disable Aux Buttons
  • Enable/disable Blind Spot Detection (if the hardware is added or removed)
  • Delete the seat belt reminder chime
  • Enable/disable/change ParkSense configuration
  • Change cluster splash screen — JL: Wrangler/Sahara/Rubicon JT: Sport/SportX/Rubicon
  • Enable HVAC dual-zone switch assembly when upgrading from 5” radio
  • Enable HomeLink if HomeLink visor and harness are installed
  • Enable/disable auto dimming mirror after installation
  • Enable Proximity Entry if handles and harnesses are installed
  • Enable pickup bed outlet (Gladiator)
  • Enable/disable auto headlights after sensors are installed
  • Enable/disable PANIC button on remote
  • Display Tazer JL Mini firmware version
  • Display Tazer JL Mini serial number
  • Display current Unmarry Number (see page 16)
  • One-touch return-to-stock – quick “Unmarry” function returns to stock
List of Live Functions
  • Activate Light Show
  • Hold brakes at a red light (excl. 4XE)
  • Use garage door opener after shutdown
  • Enable navigation entry in-motion
  • TurnCAM – activate backup camera when turn signals are used (5”, 7” and 8.4” UConnect) Kill3Honk – disable three honks that sound when leaving running vehicle with keys
  • Toggle hood alarm
  • Enable passenger side heat on remote start
  • Flash third brake light when braking
  • Customize third brake light flash pattern
  • Define Winch Mode RPM (excl. 4XE)
  • Flash lights to indicate tire pressure while filling
  • Dark Mode – turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
  • Activate and cycle through camera inputs
  • Display Vacuum/Boost Gauge
  • Activate 0-30 timer
  • Activate 0-60 timer
  • Force RWD (392 only)
  • Display firmware version
List of “Non-Menu” Live Functions
  • AutoStopStart Disable – Tazer JL Mini will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle
  • AutoTracKill – Tazer JL Mini will automatically remember the last state of the traction control system and set it for you the next time you start the vehicle
  • Disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button
  • License Plate Blanking (Gladiator) – Tazer JL Mini will automatically turn off license plate light when in reverse or using TurnCam to reduce glare
  • Activate bed lights/reverse lights from keyfob (Gladiator)
  • Axle Locker Control (Rubicon, Mojave) – engage lockers in 2WD and 4Hi on demand.
  • Cooldown Mode – turn on engine fans on-demand
  • Winch Mode – raise idle RPM to user-selected value between 1250 and 2000 (excl. 4XE)
  • Hood Alarm – monitors hood activity when the vehicle theft alarm is armed and will sound the alarm and flash a light show if opened
  • Line Lock – lock the front brakes for an easy burnout
  • Rock Crawl – lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road (excl. 4XE)
  • Lock all four brakes in park to anchor Jeep (shortcut) (excl. 4XE)
  • TC Kill – turn off traction control, stability control and ABS (excl. 4XE)
  • Show backup camera (shortcut)
  • Turn Assist – lock the inside back tire for sharper turns (button remap function only) (excl. 4XE)
  • Remap cruise +/-/RES buttons to:
    • Any of the 8 light shows
    • Backup camera
    • TC Kill (excl. 4XE)
    • Line Lock (excl. 4XE)
    • Rock Crawl (excl. 4XE)
    • Turn Assist (excl. 4XE)
    • Winch Mode (excl. 4XE)
    • Cooldown
    • Front/Rear/Front+Rear Lockers
    • SwayKill
    • Dark Mode
    • Force RWD
  • Partial Reboot
VEHICLE FITMENT
  • WORKS ON ALL VARIANTS OF THE JEEP WRANGLER AND GLADIATOR – Diesel, 392 and 4XE included!
  • 2018+ Jeep JL
  • 2020+ Jeep Gladiator (JT)

 

Shipping & Returns

SHIPPING POLICY
There is a chance that your cart will display no shipping charges. Certain items populate a standard shipping rate, others are advertised as free shipping to the lower 48, and others (often multiple parts or larger orders) may not show a rate. There is nothing more to do on your end if it is free or flat-rate shipping.

If your order does require a shipping cost/option, our shipping department will determine the shipping charges, and we will email you the cost/options for your order to ship out. Once you receive that email, there will be a link to pay for the charges, or you can cancel the order and be fully refunded.

OFFERS OF FREE SHIPPING:
All free ground shipping offers only apply to shipping addresses in the continental United States. This notification will appear above the product information and on the cart page.

FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster, please notify us in the notes section during checkout.

If you have special shipping requirements, please contact our sales department. Email us help@sdhqoffroad.com

PROCESSING YOUR ORDER:
If shipping costs need to be calculated/added, you will be emailed with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order, please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer. The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

POWDER COATED ROCK SLIDERS SHIPPING POLICY: While we pack with care, we advise against shipping powder-coated sliders due to the risk of scuffs/scratches during transit. Any shipping-related damage isn't covered by SDHQ.

GOOSE GEAR SHIPPING POLICY: All Goose Gear products are made-to-order. Once your order is placed, it cannot be cancelled or refunded. By checking this box, you acknowledge and agree to these terms. Thank you for understanding the unique nature of our custom manufacturing process.

RETURNS:
Some items may be eligible to be returned if returned as new within 30 days of shipping, with a 20% re-stocking fee. If eligible for return, the return amount will be for store credit. There are NO returns after 30 days from the date of receipt. Freight is nonrefundable. Refunds will be given on parts only and exclude labor or installation charges, shipping, or any other charges. All parts must be returned in the original package, cannot be damaged or installed, and must be in original condition.

For further info on our return policy, please visit the Online order returns page.

Shipping & Returns

SHIPPING POLICY
There is a chance that your cart will display no shipping charges. Certain items populate a standard shipping rate, others are advertised as free shipping to the lower 48, and others (often multiple parts or larger orders) may not show a rate. There is nothing more to do on your end if it is free or flat-rate shipping.

If your order does require a shipping cost/option, our shipping department will determine the shipping charges, and we will email you the cost/options for your order to ship out. Once you receive that email, there will be a link to pay for the charges, or you can cancel the order and be fully refunded.

OFFERS OF FREE SHIPPING:
All free ground shipping offers only apply to shipping addresses in the continental United States. This notification will appear above the product information and on the cart page.

FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster, please notify us in the notes section during checkout.

If you have special shipping requirements, please contact our sales department. Email us help@sdhqoffroad.com

PROCESSING YOUR ORDER:
If shipping costs need to be calculated/added, you will be emailed with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order, please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer. The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

POWDER COATED ROCK SLIDERS SHIPPING POLICY: While we pack with care, we advise against shipping powder-coated sliders due to the risk of scuffs/scratches during transit. Any shipping-related damage isn't covered by SDHQ.

GOOSE GEAR SHIPPING POLICY: All Goose Gear products are made-to-order. Once your order is placed, it cannot be cancelled or refunded. By checking this box, you acknowledge and agree to these terms. Thank you for understanding the unique nature of our custom manufacturing process.

RETURNS:
Some items may be eligible to be returned if returned as new within 30 days of shipping, with a 20% re-stocking fee. If eligible for return, the return amount will be for store credit. There are NO returns after 30 days from the date of receipt. Freight is nonrefundable. Refunds will be given on parts only and exclude labor or installation charges, shipping, or any other charges. All parts must be returned in the original package, cannot be damaged or installed, and must be in original condition.

For further info on our return policy, please visit the Online order returns page.

Quality

We pride ourselves on offering only top-tier products, handpicked through strategic partnerships with the industry's elite.

When you choose us, you're investing in unparalleled quality and craftsmanship.

Learn more about what 'SDHQ Built' means to us here.

Quality

We pride ourselves on offering only top-tier products, handpicked through strategic partnerships with the industry's elite.

When you choose us, you're investing in unparalleled quality and craftsmanship.

Learn more about what 'SDHQ Built' means to us here.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, Shop Pay, PayPal, Apple Pay, Discover and more.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, Shop Pay, PayPal, Apple Pay, Discover and more.

find everything you need?

SDHQ Built Products

Discover the robust, American-made range of SDHQ products, where superior quality meets outstanding performance. Crafted at our headquarters, our gear is built to enhance your driving experience.

we may have just the thing you're looking for

A-Pillar Light mounts to fit any light for most models of 4x4 trucks.

Switch Pro Panels to control all onboard lights and accessories.

Inexpensive ABS Guards that can save you from expensive repairs.

American-made Excellence

SDHQ: Built for Adventure

Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.

Check out what 'SDHQ Built' means for us as well as our customers: