Shop by Category



2000-2006 TOYOTA TUNDRA 2WD / 4WD & SEQUOIA UPPER CONTROL ARM

Price: $806.03
Item Number: TCF-97500
Manufacturer: Total Chaos
Manufacturer Part No.: 97500

Bad upper ball joints? We developed the solution! When you maximize lift with the installation of aftermarket shocks your upper ball joint cycles at extreme angles that it was not designed or intended to cycle to. TC developed the slug adapter and 1" Uniball bolt-on conversion originally for our long travel kits that demanded higher articulation angles for the increased wheel travel. Providing nothing but the best components available, our UCA’s will outlast the lesser quality brands that have produced knock offs in an attempt to follow. Our arms are built from chromoly tubing and feature 1" Teflon lined race grade Uniball’s that will outlast competing brands in longevity and durability. TC pivot tubes feature zirk fittings to help eliminate urethane bushing squeaks. We use only heat treated hi-misalignment spacers and a custom top spacer developed for TC. Our slug adapters are zinc plated and were designed so that the lower hi-misalignment spacer registers into the adapter and provides added strength to the hardware assembly. No drilling is necessary for this installation. The kit includes: stock length 4130 chromoly a-arms powder coated and clear coated, urethane upper bushings and inner sleeves, zinc plated end washers & slug adapters that will not rust, 1" Uniball’s, hi-misalignment spacers and 3/4" grade 8 hardware. Fiberglass fenders are not necessary. Lift varies by each vehicles set up. See the accessories section for our slug adapter and ball joint removal tool that can aid in the do-it your self installation. Icon Vehicle Dynamics TCF specific aftermarket shocks will allow for 1" of additional droop travel. Our 1" diff drop down bracket is necessary for 4wd vehicles.

 KIT INCLUDES:
  • UPPER A-ARMS W/ BUSHINGS
  • PLATED A-ARM END WASHERS
  • 1" UNIBALLS & RETAINING CLIPS
  • UNIBALL SPINDLE ADAPTER SLUGS
  • GREASE FITTINGS
  • GRADE 8 HARDWARE
ADDITIONAL ITEMS REQUIRED FOR INSTALL:
AFTERMARKET COILOVER SHOCKS OR SPACERS

RECOMMENDED SHOCK:

ICON VEHICLE DYNAMICS COILOVER

APPLICATION NOTES:
U.C.A. kit is 100% bolt on and requires no permanent modifications.
Vehicle track width will not increase. These arms are stock length.
Upper arms will work with other lift kits that retain stock upper.